AIM #920 Driveway Crack Filler Trowel Grade is a heavy-bodied sealant formulated to remain strong and flexible in any type of weather. AIM #920 Driveway Crack Filler Trowel Grade is fortified with fibers to add reinforcement. It blends with the blacktop surface to prevent water seepage and the damage it can cause. This dramatically increases the life of the asphalt surface. Once cured, AIM #920 Driveway Crack Filler Trowel Grade may be top coated with either Coal Tar or Asphalt based driveway sealers.

PREPARATION: Remove all dust, dirt, debris and loose particles with a stiff brush or broom. If air pressure is available, blow cracks clean and dry. Apply without heating at temperatures above 50 degrees Fahrenheit. In cold weather, store unopened container at room temperature for 24 hours prior to use to ease application.

APPLICATION: Do not thin. Use AIM #920 Driveway Crack Filler Trowel Grade directly as supplied. Press AIM #920 Driveway Crack Filler Trowel Grade directly into cracks using a putty knife or squeegee. Use firm pressure to insure all voids are sealed. The finished surface may be smooth using a putty knife dipped in Mineral Spirits. AIM #920 Driveway Crack Filler Trowel Grade will dry to a resilient black sealant in 24-48 hours.

TIPS:
1. For best results, cracks deeper than ½” should be sealed in two layers allowing 24 hours between applications.
2. If immediate use is required, fill crack to ¼” from top surface and lightly cover AIM #920 Driveway Crack Filler Trowel Grade with
sand. This will prevent tracking.

CLEAN UP: Clean up with mineral spirits or waterless hand cleaner. Use care when handling solvents.