PRODUCT INFO
ALL PRODUCTS
GET A QUOTE
Uses
AIM #800 Joint & Termination Sealant is a 100% solids non-shrinking moisture cure sealant intended for sealing large joints and roof termination bars. Minimal odor, contains no solvents and less than 10 grams per liter VOC. Excellent adhesion to concrete, masonry, EPDM, PVC, wood, vinyl, silicone, and most other common building materials.
Description
Specifications
Applicable Specification: ASTM C920, Type S, Grade NS, Class 25
Standard Color: White
| % Solids by Volume | 100% | |
| % Non-volatile | 99% min. | |
| Elongation | 400% @ 77°F (25°C) | ASTM D412 |
| Tensile Strength | 400 psi min. | |
| VOC | <10 g/l or < 1.5% by weight | |
| Flash Point (TCC) | None |
Application
Surface to be sealed must be clean. To use, cut tip to size and puncture seal. Maximum recommended joint width is 2 inches. Maximum recommended depth is 1 inch. Use backer rod for deep joints. Paintable after 24 hours. Application below 32ºF (0º C) is possible however curing requires free moisture in the air and will not begin until the temperature is above freezing.
