Coverage: 1.5 to 2.0 gallons per 100 square feet. Do not over-apply.

FOR EXTERIOR USE ONLY

Surface must be clean and dry, and free of moisture both on and beneath the surface. Remove rust and scale from metal by wire brushing. Carefully inspect entire area to be coated. Repair all cracks, breaks, tears and holes. Stir coating thoroughly. Do not thin. Apply a single coat over the entire surface with a brush or heavy duty spray equipment.

PRECAUTIONS: In cold weather, store unopened container in a warm room overnight before using. DO NOT APPLY IF THERE IS A THREAT OF RAIN WITHIN 24 HOURS. Avoid contact with coating after it is applied. Over-application, especially in cold weather, may cause sagging. Exposed coating tends to soften in warm weather. Do not heat container or store at temperatures greater than 110ºF.

CLEAN UP: Remove coating from tools, etc., with paint thinner or mineral spirits. Clean hands with a waterless hand cleaner. Use care when handling solvents.