AIM #720 White Elastomeric Roof Coating is formulated from 100% elastomeric acrylic polymers. AIM #720 White Elastomeric Roof Coating is supplied in highly reflective white, sandstone and gray. This is a water-based material and must be kept from freezing.

Applicable Specification: ASTM D6083
Color: White

Mechanically mix before using. Do not store above 90ºF. Apply only at temperatures above 40ºF and rising with less than 90% humidity and no threat of rain for 48 hours. Surface temperatures should be under 100ºF to avoid premature curing. If roof surface is hot, apply a light water spray to reduce its temperature.

The roof should be power-washed clean with AIM #110 Detergent Roof Primer. All metal roof fasteners should be inspected and loose, broken or missing fasteners replaced. All seams and fasteners should be sealed with AIM #740 White Acrylic Mastic prior to coating the roof. Cracked areas should be reinforced with Tietex fabric. The surface must be clean and free of loose or flaky rust and paint.

Apply with a roller or suitable spray equipment at the rate of 1.25 gallons per 100 sq. ft. A second coat of AIM #720 White Elastomeric Roof Coating is required to achieve a consistent, pinhole free, surface approximately 20 mils thick. Drying time to first top coat @ 70ºF is 2 to 4 hours. Clean up uncured coating with soap and water.

AIM #720 White Elastomeric Roof Coating may be used for complete restoration of mobile home roofs when combined with polyester fabric reinforcement. For complete encapsulation of the roof, 40 inch widths of fabric should be embedded in 2 gallons per 100 sq. ft. of coating. An additional two coats of AIM #720 White Elastomeric Roof Coating at 1.5 gallons per 100 sq. ft., totaling 3 gallons, should be applied to the top surface after the first coat has dried. All laps should be a minimum of 4 inches.