PRODUCT INFO
ALL PRODUCTS
GET A QUOTE
Uses
AIM #300 Plastic Roof Cement is a trowel-applied Plastic Cement used to install, repair or rebuild roof flashings at parapet walls, gravel stops, stacks, vents, monitors and similar applications. AIM #300 Plastic Roof Cement may be used with fiberglass, polyester fabrics or roll roofing for permanent repairs.
Description
AIM #300 Plastic Roof Cement is manufactured from Type I Roofing Asphalt, petroleum solvents and non-asbestos reinforcing fibers. It applies fast and smooth and breaks cleanly off the trowel without stringing.
Specifications
Applicable Specification: D4586
| Recommended Rate of Application | 1/8 to 1/4 inch thick |
| % Asphalt | 48 min. |
| % Solids | 71 min. |
| % Non-volatile | 84 Max. |
| % Mineral Filler Content | 14 min. |
| VOC | <250 g/l max. |
| Weight per Gallon | 9.4 lbs. (+/- 0.4 lb/gal) |
| Flash Point (TCC) | +100°F (38.7°C) |
Application
The surface to be repaired must be clean, dry and free of debris. Apply AIM #300 Plastic Roof Cement evenly with a pointed roofer’s trowel or gloved hand. AIM #300 Plastic Roof Cement should be applied 1/8 to 1/4 of an inch thick and may be reinforced with glass membrane or polyester fabric to strengthen the repair. When making a permanent repair to a blister, open up the area and allow it to dry thoroughly.
Clean up with mineral spirits or waterless hand cleaner. Use care when handling solvents.
