PRODUCT INFO
ALL PRODUCTS
GET A QUOTE
Uses
AIM #790 Thermoplastic White Flashing Cement is a solvent-based Terpolymer sealant intended for the repair of asphalt, modified bitumen, metal, Kynar®, concrete, TPO, PVC, Elvaloy®/PVC, Hypalon® (CSPE), PIB and EPDM roofs. Extremely strong and elastic. High elongation and tensile strength insure performance under conditions that will cause asphalt based cements to fail. Unique surface active additives allow application to wet or underwater surfaces. AIM #790 Thermoplastic White Flashing Cement is the ideal maintenance and repair product for all roofs in all weather.
Description
AIM #790 Thermoplastic White Flashing Cement is manufactured from synthetic elastomers, adhesive resins and polyolefin microfibers for reinforcement. Consistency is medium viscosity but high-bodied for application to vertical surfaces with no sagging.
Specifications
Standard Color: White
| Recommended Rate of Application | 1/8 inch thick |
| % Solids By Volume | 49 min |
| % Non-Volatile | 55 max |
| Elongation | 300% @ 77ºF (25ºC) |
| Flash Point (TCC) | +100ºF (38.7ºC) |
| VOC | Less than 375 g/l |
Application
Surface must be clean and sound. Apply with a roofer’s trowel 1/8 inch thick. Taper edges of the repair. Polyester fabric may be embedded for added strength. When applying to wet surfaces, pressure is required to displace moisture and insure proper adhesion. Over application on EPDM roofs may cause swelling of the EPDM. Clean up with mineral spirits or waterless hand cleaner. Use care when handling solvents.
